广州西门子PLC代理商电源供应商
 | 6ES7228-1RC51-0AA0 SIMATIC S7-1200，EMS400S， 电源信号放大器 PSB-C， 1x AQ，0.. 10V DC， RS-232， 母线信号 48V DC |
SIMATIC EMS400S PSB-C-module
订货数据
产品信息
概述
技术规范
概述EMS400S rail signal booster
The PSB-C (power signal booster carrier) module is employed in the cart and establishes the communication between the cart and the segment control.
The module is connected on the right of the S7-1200 as an I/O module.
The PSB-C module can operate one rail channel.
Other interfaces:
Analog velocity setpoint
RS232 interface for the IR-DU display module
Technical specifications | SIMATIC EMS400S PSB-C module |
Power supply | |
Nominal voltage | 24 V DC |
Power consumption, typical | Approx. 0.1 A |
Analog output | |
Number of outputs | 1 |
Output | Voltage, 0-10 V DC |
Resolution | 10 bits |
RAIL interface | |
Number | |
Type | Differential, 48 V AC |
Data rate | 16 bits / 250 ms |
Display unit interface | RS232-based |
Ambient conditions | |
Degree of protection | |
Front/rear | IP20 |
Ambient temperature | |
In operation, vertical installation | 0 °C to +45 °C |
In operation, horizontal installation | 0 °C to +55 °C |
Relative humidity | 10 % to 95%, without condensation |
Storage temperature | -40 °C to +70 °C |
Certificates | CE, cULus |
Dimensions | |
Dimensions (W x H x D) in mm | 70 x 100 x 75 |
Weight | Approx. 210 g |
| 模拟量模块 | 6ES72883AE040AA0 | S7-200 SMART，EM AE04，模拟量输入模块，4 输入 |
| 6ES72883AE080AA0 | S7-200 SMART，EM AE08，模拟量输入模块，8 输入 | |
| 020AA0 | S7-200 SMART，EM AQ02，模拟量输出模块，2 输出 | |
| 040AA0 | S7-200 SMART，EM AQ04，模拟量输出模块，4 输出 | |
| 6ES72883AM030AA0 | S7-200 SMART，EM AM03，模拟量输入/输出模块，2 输入/ 1 输出 | |
| 6ES72883AM060AA0 | S7-200 SMART，EM AM06，模拟量输入/输出模块，4 输入/ 2 输出 | |
| 6ES72883AR020AA0 | S7-200 SMART，EM AR02，热电阻输入模块，2 通道 | |
| 6ES75162GN000AB0 | S7-200 SMART，EM AR04，热电阻输入模块，4 通道 | |
| 6ES72883AT040AA0 | S7-200 SMART，EM AT04，热电偶输入模块，4 通道 | |
| 通信模块 | 6ES72887DP010AA0 | S7-200 SMART，EM DP01，Profibus-DP从站扩展模块 |
| IO扩展电缆 | 6ES72886EC010AA0 | S7-200 SMART I/O扩展电缆，长度1米 |
广州西门子PLC代理商电源供应商 广州西门子PLC代理商电源供应商